Troubleshooting – AT&T E1833B User Manual
Page 41

38
ɇ
There is noise or
interference dur-
ing a telephone
conversation
ƨ Ɠ
telephone base.
ƨ ɇ
the same circuit as the telephone base can cause inter-
ference. Try moving the appliance or telephone base to
another outlet.
ƨ
cordless telephone. Try installing your telephone as far
away as possible from the following electronic devices:
wireless routers, radios, radio towers, pager towers, cel-
lular telephones, digital telephones, intercoms, room
Ɛ Ɛ Ɛ Ɛ
appliances, and other cordless telephones.
ƨ
Ɠ
Ɠ
this telephone in the same outlet or near a microwave oven.
ƨ
protector, plug the telephone (or modem/surge protec-
tor) into a different location. If this solves the problem,
re-locate your telephone or modem farther apart from
each other, or use a different surge protector.
ƨ
operating range. Try moving the base to another loca-
tion, preferably a higher location for better reception.
ƨ
and plug in a corded telephone. If calls are still not clear,
the problem is probably in the wiring or local service.
ƪ
ƫƓ
My calls fade out
or cut in and out
when I am using
t h e c o r d l e s s
handset
ƨ Ɠ -
sion, radio, or other appliances may cause the telephone
to not dial out properly. If you cannot eliminate the
background noise, first try muting the cordless hand-
set before dialing, or dialing from another room in your
home with less background noise.
Troubleshooting