Samsung EAD-T10 - Manual (Page 8)

6
1
Connect the AllShare Cast Dongle to a power outlet using the travel adapter.
The indicator turns red after 3 to 4 seconds.
2
Connect the AllShare Cast Dongle to a monitor using the HDMI A-to-A cable.
The red indicator begins blinking after approximately 30 seconds.
• For information about connecting the HDMI cable, refer to the monitor’s user
manual.
• The mobile device cannot connect to the AllShare Cast Dongle, unless the
AllShare Cast Dongle is connected to a monitor.
3-1
To connect to a new mobile device, use one of the following methods. The PIN
code method is not supported on some mobile devices.
• Reset button method (complete steps within 2 minutes)
Press the Reset button. The indicator turns blue. On the mobile device, launch
AllShare Cast or Screen Mirroring. The monitor displays the AllShare Cast
Dongle's name. Select the same name from the list that is displayed on your
mobile device.