Fml d l, Fml d l ^fml d l, Gly ^jst – AMX Mio Modero Device Family User Manual
Page 23
![background image](/manuals/42021/23/background.png)
Programming The Mio Modero
19
Mio Modero Device Family
SEND_COMMANDs (Cont.)
^FML D L
Sets a line of the display to a dynamic line with a level
Syntax:
"'^FML-
Variables:
• variable text address range = 1 - 4; the address range corresponds to the dynamic line
number.
• D = Dynamic line type
• L = Level
Example:
SEND_COMMAND Panel,"'^FML-1,D,L'"
Set line 1 to a Dynamic line with level
^FML D L #
Sets a line of the display to a dynamic line with a level, and sets the level style
Syntax:
"'^FML-
Variables:
• variable text address range = 1 - 4; the address range corresponds to the dynamic line
number.
• D = Dynamic line type
• L = Level
• level style = 0 or 1 for level style type
Example:
SEND_COMMAND Panel,"'^FML-1,D,L,0'"
Set line 1 to a Dynamic line with level and set style to 'Level Style 0’
^GLY
(LCD equipped only)
Set Glyph Character.
Syntax:
"'^GLY-
Variables:
• variable text address range = 1 - 4; the address range corresponds to the dynamic line
number.
• glyph number = glyph text.
Example:
SEND_COMMAND Panel, "'^GLY-1&4,',2"
Sets the second glyph character on dynamic lines 1 and 4 of the LCD button.
^JST-
(LCD equipped only)
Set text alignment using a numeric keypad layout for those buttons with a defined
address range
Syntax:
"'^JST-
Variables:
• variable text address range = 1 - 4; the address range corresponds to the dynamic line
number.
• new text alignment = Value of 1 - 9 corresponds to the following locations:
1, 4 or 7 = Left
2, 5 or 8 = Center
3, 6 or 9 = Right
Example:
SEND_COMMAND Panel,"'^JST-1.4,1'"
Sets the text alignment to the left side on dynamic lines 1, 2, 3 and 4 of the LCD button
Note: There is no vertical alignment.