Atmel ATmega88PA - Manual (Page 25)

25
8161DS–AVR–10/09
ATmega48PA/88PA/168PA/328P
10.4 Rev. 8161A – 11/08
7. Updated ”External Interrupts” on page 70 .
8. Inserted Typical characteristics for ”ATmega48PA Typical Characteristics” on page 327 .
9. Updated figure names in Typical characteristics for ”ATmega88PA Typical Character-
istics” on page 351 .
10. Inserted ”ATmega48PA DC Characteristics” on page 314 .
11. Updated Table 28-1 on page 317 by removing the footnote from Vcc/User calibration
12. Updated Table 28-7 on page 323 by removing Max value (2.5 LSB) from Absolute
accuracy, V
REF
= 4V, V
CC
= 4V, ADC clock = 200 kHz.
13. Inserted Ordering Information for ”ATmega48PA” on page 430 .
1. Initial revision (Based on the ATmega48P/88P/168P/328P datasheet 8025F-AVR-08/08).
2. Changes done compared to ATmega48P/88P/168P/328P datasheet 8025F-AVR-08/08:
– Updated ”DC Characteristics” on page 313 with new typical values for I
CC
.
– Updated ”Speed Grades” on page 316 .
– New graphics in ”Typical Characteristics” on page 326 .
– New ”Ordering Information” on page 430 .