Avanti PAC12000 User Manual

Page 14

Text mode
Original mode

Draining condensed water step by step

Drainage Hole

Rubber Plug

Drainage Knob

Water Plate

1. Turn off the unit.
2. Place the Water Drain Tray underneath the Drainage Pipe.
3. Remove the Drainage Knob and the Rubber Plug, then condensed water will automatically flow out.
4. If the Water Drain Tray gets full, push the Rubber Plug back to the Drainage Pipe and empty the

tray.

5. Repeat steps 2, 3 and 4, until all the condensed water in the unit is drained.
6. Put back the Rubber Plug and the Drainage Knob to the Drainage Pipe.
7. Restart the unit

End-of-Season Care

• Operate the air conditioner, in FAN mode alone, for half a day to dry out the inside of the unit.
• Turn off power and remove plug from wall socket.
• Clean

filter.

• Drain.
• Store in dry location.