AT&T 410 820 - Manual (Page 14)

Programmable Button Features
OUTSIDE AUTO DIAL
You can dial any outside number with a single touch of a but-
ton. When you touch an Outside Auto Dial button, the
MERLIN
system selects an outside line, turns on the speaker, and
automatically dials the number. When the other person answers,
lift the handset to speak. If no one answers, touch Speaker to
cancel. You can program up to 16 digits or characters on each
Outside Auto Dial button.
Special Characters with Auto Dial and Speed Dial
You can put the following special instructions in an Auto Dial or
Speed Dial sequence:
Home
Pause:
Stop:
Recall:
Transfer:
●
●
●
●
●
Auto Dialing will pause for 1.5 seconds, allowing
connection with a PBX or computer-based ser-
vice to be established.
Touch Hold (Pause).
Auto Dialing will stop until reactivated, allowing
connection with a computer-based service to be
established.
Touch Drop (Stop).
Puts a switchhook flash at the beginning of an
Auto Dialing sequence for Centrex/PBX features.
Touch Recall
Touch Hold (Pause).
Switches to TouchTone signaling.
Touch Transfer.
Hold
Pause
Drop
Stop
Recall Hold
+
Pause
Transfer
13