AEG KO_FAVORIT 80800 - Manual (Page 10)

Operating Instructions
10
Control Panel
The Control Panel comprises the ON/OFF switch (AAN/UIT;
MARCHE/ARRET) and the programme buttons with LED indicators.
Signal Tone Button: In addition to the wash programme printed on
the front panel, this button can be used to set whether a signal tone is
to indicate that a wash programme is finished.
Water Softener Button: In addition to the wash programme printed
on the front panel, this button can be used to adjust the dishwasher's
water softener.
The Multi-Display can display,
– the hardness setting to which the water softener is set.
– whether the signal tone is switched on or off.
– the start delay that is set.
– how long the current wash programme can be expected to last.
– which fault has occurred on the dishwasher.
The indicators have the following significance:
3 The FILTER indicator (ZEFF; FILTRE) is intended to remind you to check
the filters in the dishwasher from time to time and, if necessary, to
clean it. The indicator illuminates at regular intervals, independent of
the amount of soiling of the filters.
SALT (ZOUT; SEL) Refill with special salt
RINSE AID
(GLANSMIDDEL; PDT. DE RINCAGE)
Refill with rinse aid
WATER (WATER; EAU) Open tap
FILTER (ZEFF; FILTRE) Clean the dishwasher's filter system
DOOR (DEUR; PORTE) The dishwasher door is open
SPRAY ARM (SPROEIARM; BRAS) The middle spray arm is jammed
AAN/UIT
MARCHE/ARRET
AUTO
65°
AUTO
BIO 50°
NORMAAL
NORMAL 65°
INTENSIEF
INTENSIF 70°
NORMAAL BIO
NORMAL 50°
QUICK
RAPIDE 40°
E-STAND
ECO 50°
VOORSPOELEN
PRELAVAGE
STARTTIJDKEUZE
DEPART DIFFERE
LOOPTIJD
TEMPS RESTANT
VOORSPOELEN
PRELAVAGE
EINDE
FIN
ZOUT
SEL
DEUR
PORTE
SPROEIARM
BRAS
DROGEN
SECHAGE
NASPOELEN
RINCAGE FINAL
SPOELEN
RINCAGE
REINIGEN
LAVAGE
GLANSMIDDEL
PDT. DE RINCAGE
WATER
EAU
ZEEF
FILTRE
Multi-
Display
Control Panel
Indicators
Set Start
Delay
Air Outlet for Fan
Assisted Drying
Door
Handle
Display for the Individual
Wash Programme Steps
Water Softener
Button Signal Tone
Button