Samsung PS42C450B1W - Manual (Page 14)

14
English
Basic Features
Scheduled
(in Channel Manager)
You can view, modify or delete a show you have reserved to
watch.
■ Change Info: Change a show you have reserved to
watch.
■ Cancel Schedules: Cancel a show you have reserved
to watch.
■ Information: Display a show you have reserved
to watch. (You can also change the reservation
information.)
■ Select All / Deselect All: Select or deselect all reserved
programmes.
Fine Tune
(analogue channels only)
If the signal is weak or distorted, fine tune the channel
manually.
✎
Fine tuned channels are marked with an asterisk “*.”
✎
To reset the fine-tuning, select Reset.
Picture Menu
¦ Changing the Preset Picture Mode
Mode
Select your preferred picture type.
■ Dynamic: Suitable for a bright room.
■ Standard: Suitable for a normal
environment.
■ Movie: Suitable for watching movies in a
dark room.
¦ Adjusting Picture Settings
Cell Light / Contrast / Brightness /
Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality
control.
✎
NOTE
x In analogue TV, Ext., AV modes of the PAL system,
the Tint (G/R) function is not available.
x In PC mode, you can only make changes to
Cell Light, Contrast and Brightness.
x Settings can be adjusted and stored for each
external device connected to the TV.
¦ Economical Solutions
Eco Solution
■ Energy Saving (Off / Low / Medium / High /
Picture Off)
t : This adjusts the brightness of
the TV in order to reduce power consumption. If you
select Picture Off the screen is turned off, but the
sound remains on. Press any button except volume
button to turn on the screen. Until the screen turns on
again, a distorted picture will be displayed for about 4
seconds.
■ Eco Sensor (Off / On): To enhance your power savings;
the picture settings will automatically adapt to the light
in the room.
✎
If you adjust the Cell Light, the Eco Sensor will
be set to Off.
Min Cell Light: When Eco sensor is On, the minimum
screen brightness can be adjusted manually.
✎
If Eco Sensor is On, the display brightness
may change (become slightly darker or brighter)
depending on the surrounding light intensity.
■ No-Signal Power Off (Off / 15 min / 30 min / 60 min):
To avoid unnecessary energy consumption, set how long
you want the TV to remain on if it's not receiving a signal.
✎
Disabled when the PC is in power saving mode.
¦ Changing the Picture Options
Advanced Settings
(available in Standard / Movie mode)
You can adjust the detailed setting for the screen including
colour and contrast.
✎
In PC mode, you can only make changes to
Dynamic Contrast, Gamma and White Balance.
P.MODE
Advanced Settings
Black Tone : Off ►
Dynamic Contrast : Medium
Gamma : 0
RGB Only Mode : Off
Colour Space : Native
White Balance
Flesh Tone
: 0
▼
UMove E Enter R Return
[450]BN68-02575D-01L10.indb 14 2010-03-09 오후 4:39:08