Connecting to an antenna, Plug & play (initial setup), Getting started – Samsung LE32C530F1W User Manual
Page 6
6
Getting Started
English
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎
Preset: Connecting the mains and antenna.
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER
P button. Plug & Play is available only when the Input source is set to TV.
✎
To return to the previous step, press the Red button.
1
Selecting a language
Press the
▲ or ▼ button, then press the
ENTER
E button.
Select the desired OSD (On Screen Display) language.
P
POWER
2
Selecting Store Demo or
Home Use
Press the
◄ or ► button, then press the
ENTER
E button.
• Select the Home Use mode. Store Demo Mode is for retail environments.
• Return the unit’s settings from Store Demo to Home Use (standard): Press the
volume button on the TV. When the OSD volume is displayed, press and hold
MENU
for 5 sec.
3
Selecting a country
Press the
▲ or ▼ button, then press the
ENTER
E button.
Select the appropriate country.
4
Selecting an antenna
Press the
▲ or ▼ button, then press the
ENTER
E button.
Select Air or Cable.
5
Selecting a channel
Press the
▲ or ▼ button, then press the
ENTER
E button.
Select the channel source to memorise. When setting the antenna source to Cable, a step appears allowing
you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel
→
Auto Store (p. 12).
✎
Press the
ENTER
E button at any time to interrupt the memorization process.
6
Setting the Clock Mode
Set the Clock Mode automatically or manually.
Press the
▲ or ▼ button to select Auto, then press the
ENTER
E button.
7
Time Zone
Press the
▲ or ▼ button to select the your time zone, then press the
ENTER
E button. (depending on the
country)
8
Viewing the
HD Connection Guide.
The connection method for the best HD screen quality is displayed.
9
Enjoy your TV.
Press the
ENTER
E button.
If You Want to Reset This Feature...
Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to
change the PIN number, use the Change PIN function.
ANT OUT
1
1
VHF/UHF Antenna
or
Cable
Power Input
[E-Euro]BN68-02542C-00L10.indb 6
2010-03-05 오전 1:02:51