Recording, Listening through a receiver – Samsung PS58B850Y1W User Manual

Page 47

English - 47

Recording

You can make a recording of a TV programme using a Samsung recorder.
1. Press the TOOLS button. Press the ENTERE button to select Anynet

(HDMI-CEC).

2. Press the ▲ or ▼ button to select Recording(recorder): then press the ENTERE

button. Recording begins.

When there is more than one recording device

When multiple recording devices are connected, the recording devices are listed.

Press the ▲ or ▼ button to select a recording device and press the

ENTERE

button. Recording begins.
When the recording device is not displayed

Select

Device List and press the red button to search devices.

Pressing the

button will record whatever you are currently watching. If you are watching video from another device, the video

from the device is recorded.

Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an antenna to

a recording device, refer to the recording device’s users manual.

TV Remote Control Buttons Available in Anynet+ Mode

❑

Device Type

Operating Status

Available Buttons

Anynet+ Device

After switching to the device, when the

menu of the corresponding device is

displayed on the screen.

Numeric buttons

▲/▼/◄/►/

ENTERE buttons

Colour buttons /

EXIT button

After switching to the device, while

playing a file

(Backward search) /

(Forward search)

(Stop) /

(Play) /

(Pause)

Device with

built in Tuner

After switching to the device, when you

are watching a TV programme

button

Audio Device

When Receiver is activated

/ button

MMUTE button

The Anynet+ function only works when the active source on the TV remote control is set to TV.

The

button works only while in the recordable state.

You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote control.

The TV remote control may not work under certain conditions. In this case, reselect the Anynet+ device.

The Anynet+ functions do not operate with other manufacturers’ products.

The

operations may differ depending on the device.

If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, it

will be represented as (*device_name).

Listening through a Receiver

You can listen to sound through a receiver instead of the TV speaker.
1. Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC).
2. Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select On or Off.

If your receiver supports audio only, it may not appear in the device list.

The receiver will work when you have properly connected the Optical IN jack of the

receiver to the Optical Out jack of the TV.

When the receiver (home theater) is set to On, you can hear sound output from the

TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1

channel sound to the Home theater receiver. When the source is a digital component

such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver.

When using the Media Play feature, sound may not output properly through the receiver.

When listening through the receiver, there are restrictions for using the audio-related (MTS, Preferred language) menus.

If there is a power interruption to the TV when the

Receiver is set to On (by disconnecting the power cord or a power failure), the

Speaker Select may be set to External Speaker when you turn the TV on again. (see page 21)

Move

Enter

Return

View TV
Device List
Recording

: DVDR

DVDR MENU
DVDR INFO
Receiver

: On

Setup