3 windows 2000/xp – Campbell Scientific SC-USB USB to CS I/O Optically Isolated Interface User Manual

Page 23

Text mode
Original mode

SC-USB USB to CS I/O Opto-isolated Interface

3.1.3 Windows 2000/XP

Use the USB cable to connect your SC-USB device to the PC’s USB port. The
first time that this is done, the ‘Found New Hardware Wizard’ screen will
normally be displayed, as shown below for XP (Windows 2000 screens may
not be identical to these).

Select ‘No, not this time’ and Press ‘Next’ and you will see the following
screen.