Campbell Scientific SC-USB USB to CS I/O Optically Isolated Interface - Manual (Page 10)

SC-USB USB to CS I/O Opto-isolated Interface
3.1.1 Windows 7
Connect the SC-USB to a spare USB port on your PC. If there is an available
internet connection, Windows 7 will silently connect to the Windows Update
website and install any suitable driver it finds for the device. If no suitable
driver is found automatically, you will see a message similar to this...
...if so, use the following procedure to update the driver.
Click the Windows start button to bring up the start menu and click ‘Control
Panel’ as shown below...
4