Campbell Scientific NL120 Ethernet Module - Manual (Page 10)

NL120 Ethernet Module
FIGURE 4-2. LoggerNet setup
4.2.3 Step 3 – Connect
You are now ready to connect to your datalogger using the LoggerNet Connect
screen.
Datalogger program transfer, table-data display, and data collection are now
possible.
5. Specifications
Datalogger Compatibility: CR1000, CR3000
Power Requirements:
12 V supplied through datalogger’s peripheral
port
Typical Current Drain: 20 mA
(Note: To save power, the IPNetPower()
instruction can be used to turn off power to the
NL120. See the CRBasic help for an example
of using the IPNetPower instruction.)
Operating Temp. Range: –25° to +50°C Standard
–40° to +85°C Extended
EMI and ESD Protection: Meets requirements for a class-A device under
European Standards
Application of Council Directive(s):
89/336/EEC as amended by 89/336/EEC and
93/68/EEC
Standards to which conformity is declared:
EN55022-1: 1995 and EN50082-1: 1992
4