Campbell Scientific CD294 DataView Dual Line Data Display - Manual (Page 6)

DataView (CD294) Dual Line Data Display
Windows 95 / 98/ 2000
1. Insert the PC294 CD into the CD drive.
2. From the Start menu select ‘Run’.
3. Type N:\setup (where N is the CD drive).
4. Click OK.
5. Follow the installation instructions as they are presented.
In either of the above installations, PC294W will create a program group and
all the necessary files will be installed. In addition to the program files there
will be a sample LCD file called TEST.LCD and a download file called
TEST.DLD. These files can be used to modify and send to the DataView.
4. Programming
The DataView is programmed using PC294W, a windows based program
which guides the user though the programming process.
The program has the following limitations:
• Only the first 255 input locations can be sent to the DataView
• The DataView can be configured to display up to 18 locations.
For help on the function of any of the buttons, simply leave the mouse
positioned over a button for a short period of time and an extended message
will appear.
The program briefly displays a splash screen that displays information about
the program, including the License details and the version number.
FIGURE 1. Splash Screen
2