Airlink101 AWLL5077 User Manual

Page 11

Text mode
Original mode

If the network that you are attempting to connect does not have encryption enabled,

you

will receive a warning about connecting to an unsecured network. Click OK to complete
the connection. Go to

Step 6.

Step 5

Enter the network security key of your wireless router or AP into Network key and

Confirm network key boxes.

The Adapter may automatically detect the type of Network Authentication and Data
Encryption. You need to enter the security settings in the Network key, Confirm
network key boxes according to the settings of the wireless router or AP then click OK
to connect.

Step 6

The connection is now established. You can check the status of your connection

under “Link Status” tab. The Connection should be Connected, and there should be a
blue bar displaying the Signal Strength.