Chatsworth Products Analog KVM - Manual (Page 27)

27
Local Console Hotkeys
Hotkey Function
Scroll Lock + Scroll Lock + Space Bar Calling OSD menu
Right-button mouse + Esc Calling OSD menu
Scroll Lock + Scroll Lock + Switch to previous port
Scroll Lock + Scroll Lock + Switch to next port
Scroll Lock + Scroll Lock + PgUp / PgDn Switch to previous bank or next bank
Scroll Lock + Scroll Lock + Bank Number
+ Port Number Switch to specific port
*Example SL + SL + 1 + 08 (bank 1, port 8)
Scroll Lock + Scroll Lock + B
Turn the buzzer ON and OFF
*Default the buzzer is ON
Scroll Lock + Scroll Lock + P
Logout the KVM if password security is ON. Show
up the status windows
Advance hotkeys (for Supervisor login only)
Scroll Lock + Scroll Lock + S
Activate auto-scan mode for connected servers
*Press any key to exit the auto-scan mode
Scroll Lock + Scroll Lock + R
Reset all the KVM settings to factory default
*Except User Security settings
Scroll Lock + Scroll Lock + U
Disable and enable password security
*Default security is OFF
Scroll Lock + Scroll Lock + L
To enable / disable the screen saving function and
10 minutes auto-logout
*Default the screen saving is OFF
Note: The numeric keypad is not supported in the OSD screen.
Remote Console Hotkeys
Hotkey Function
Scroll Lock + Scroll Lock + C Toggle between computer and KVM switch
Scroll Lock + Scroll Lock + Q
Turn the buzzer ON & OFF
*Default the buzzer is ON
Scroll Lock + Scroll Lock + S
Activate auto-scan mode for remote & local port.
*The scan time interval is 5 seconds
Scroll Lock + Scroll Lock + A Auto-adjust the video signal
Note: Only IP KVM Switches with Cat5/6 ports have Remote Consoles.