Weems and Plath Endurance 125 Clock - Manual (Page 7)

Quartz Clock Trouble Shooting
Clock will not A. Install fresh alkaline battery.
run properly B. Inspect battery contact points, remove
corrosion if present.
C. Call Customer Service at 1-800-638-0428.
Quartz DayClock® Operating Instructions
1) Lift clock to disengage Slide ‘n Lock system from wall.
2) Insert a “AA” alkaline battery in back of movement. Follow diagram on
battery housing to make certain battery is not put in backwards. Use
only alkaline batteries as they have longer life and are less prone to
leak.*
3) On movement at the back of the DayClock pull out small knob and
rotate day hand to either line of desired day, for AM setting select line
next to previous day, for PM setting select line next to following day.
Do not push knob in.
4) On movement at the back of the DayClock rotate large wheel to get the
hour and minute hand to 12. When both the hour and minute hands
are at 12, push in small knob for day hand.
5) Rotate large wheel clockwise for AM setting, counter clock wise for
PM settings.