ARCHOS Version 2.1 - Manual (Page 24)

504/604 MANUAL V2.1 USING THE AUDIoCoRDER > p. 24
3. usIng The audIOCOrder
You can record audio either from the built-in microphone or from an ex-
ternal line-level analog source if you use the optional DVR Station or DVR
Travel Adapter .
In the Home Screen, highlight the AudioCorder icon and press OK to display the
pre-recording screen.
All audio recordings made by your ARCHoS ™ device are saved in the Music/
Recordings folder. If you wish to keep them in a different location, you can use
the Move function of the Archos ™ file browser after recording (see: Using the
browser).
The icon flashes in the status bar while recording.
Audio files recorded by your ARCHOS ™ device will be tagged as follows: Artist =
(Archos: Audio Recordings), Album = (Unknown).
3.1 audIOCOrder seTTIngs sCreen
This screen allows you to adjust audio input settings for your recordings. Use / to
highlight a different parameter, then use / to select a different setting.
Set Title
allows you to give a personalized title to the recording (See: Using the Virtual
keyboard ).
format
you can choose between PCM (uncompressed) and ADPCM (compressed) WAV
format.
Source
choose between microphone or analog line-in (only with the optional DVR
Station or DVR Travel Adapter ).
Sampling
choose the sample rate for your recording (a higher rate gives higher sound
quality but a larger file).
•
•
•
•
-
•
-
•
-
•
-