ASKO W6903 - Manual (Page 24)

High Water Level
1. High Water Level means additional water is used during the main wash and rinse cycles.
Select High Water Level by pressing the program selector until the High Water Level symbol
is highlighted.
Note!
The machine takes in the additional water for High Water Level about 15 minutes after the
main wash has started.
2. You cannot choose this option with the Auto, Time, Wool, Delicate/Hand, Rinse, Drain, or
Spin programs.
3. You can choose Normal Water Level or High Water Level by turning the program selector.
4. Press the Start/Stop button to start the program or press the button in the middle of the program
selector to choose more options.
Delayed Start
1. When you select Delayed Start, the machine will start 1-24 hours after you press the Start/Stop
button. Select Delayed Start by pressing the program selector until the clock symbol is high-
lighted and the current start and end times appear on the right of the display.
2. This option cannot be used with the Time program.
3. Each time you press the arrow buttons you add half an hour to the time up to a maximum of
24 hours.
Important!
Remember to press the Start/Stop button to start the program.
Customer Care Center 24
1-800-898-1879
www.askousa.com
Selecting Options