ALESIS QSR 64 - Manual (Page 88)

Editing Programs: Chapter 6
QSR Reference Manual 41
C
OPYING
E
FFECTS
While editing a Program, it is helpful to be able to copy the Effects Patch from a
different Program. This can be done very easily from within the Store function.
Be sure to save your changes to the current edited Program before going to a new Program.
Otherwise, all your changes will be lost.
To copy the Effects Patch from a Program to another Program:
➀
Press [PROG] to select Program Play Mode, then use the [VALUE] knob to select
the Program Number that uses the Effects you want to copy. If necessary, use the
BANK SELECT [DOWN] and [UP] buttons to select a different Bank.
➁
Press [STORE].
The [STORE] button will begin to flash.
➂
Press [CURSOR
▲
] three times to advance to Page 3.
The upper section of the display will read:
COPY E FFECT TO
PROG 000 (STR)
➃
Use the [VALUE] knob to select the Effects Patch of the currently selected
Program, or any Program (000 - 127) in the User Bank to copy from.
➄
Press [CURSOR
▲
] once to advance the cursor to the Program number value in
the lower section of the display.
➅
Turn the [VALUE] knob to select the Program Number in the User Bank you
wish to copy the Effects to (000–127), or the
E FFECT of the currently selected
Program.
➆
Press [STORE] to complete the copy function.
✪