AT&T E5804 - Manual (Page 15)

12
Telephone operation
Settings
Use the MENU/SELECT to change the handset
settings. Follow the steps below to program the
cordless handset. To stop at any time, press
OFF
/CLEAR.
Choose cordless handset ringer sound
1. Press
MENU/
SELECT
to begin programming.
2. Press
CID
or
DIR
until the screen displays
RINGER: and the current setting.
3. Press
MENU
/SELECT to change the current set-
ting.
4. Press
CID
or
DIR
to display 1, 2, 3, 4 or OFF.
You will hear a sample of each ringer sound.
5. Press
MENU
/SELECT to choose displayed ringer
sound and exit.
NOTE: If you choose OFF, the cordless handset ringer will
be turned off, and the screen will display RINGER OFF and
when the cordless handset is idle (not in use). If there are any
un-reviewed calls, the screen will display
XX MISSED CALLS
instead of RINGER OFF and .
Set cordless handset display date and time
1. Press
MENU/
SELECT
to begin programming.
2. Press
CID
or
DIR
until the screen displays
DATE/TIME .
3. Press
MENU
/SELECT to view or set date and
time.
4. Press
CID
or
DIR
to change the month in the
date and time line at the bottom of the display,
then press
MENU
/SELECT.
5. Repeat step four to set day, hour, minute, and
AM/PM.
6. Press
MENU
/SELECT to save selection and exit.
RINGER: 1
NOTES:
1. You can choose to set the time
manually, or you can allow it
to be set automatically with
incoming caller ID information.
The time will be set automati-
cally only if you subscribe to
caller ID service provided by
your local telephone company
(page 24).
2. Caller ID will not set the year.
DATE/TIME
10:08 02/14