AT&T E5804 - Manual (Page 10)

7
Getting started
BATTERY LOW
10:08 AM 02/14
NEEDS RECHARGING
then
Battery installation & charging
After installing the battery, you may be able to make or receive short calls. For
best performance, place the handset in the telephone base to charge for 16
hours before use.
You can keep the battery charged by returning the handset to the telephone base
after use. When the battery is fully depleted, a recharge takes about 12 hours.
The average talk time on a fully charged battery is about eight hours, and the
standby time is approximately three days. Actual battery life depends on usage
conditions and age of battery.
1. Insert the plug as indicated.
Be sure to securely insert the
plug, making sure matches the
color-coded label inside the
battery compartment.
4. You may be able to make or receive
short calls. For best performance, place
the handset in the telephone base to
charge for at least 16 hours before first
use.
Caution: Use only the supplied rechargeable battery, replacement battery 2422 (SKU 23402, part
number 89-0047-00-00) or equivalent. To order a replacement battery, visit our website at www.tel-
ephones.att.com or call 1 (800) 222-3111; in Canada, call 1 (866) 288-4268.
To replace the battery,
press in and downward
on the tab of the bat-
tery compartment to
open the battery com-
partment cover. Lift
out the old battery
and disconnect it from
the handset. Follow
the instructions on
this page to install and
charge the new battery.
3. Slide the battery
compartment cover
up until it clicks.
2. Place the battery
and wires inside the
compartment.
NOTE: Under normal conditions, the
battery should last around one year. This
may vary depending on usage.
Battery low indicator
Return the handset to the
telephone base to recharge
when this symbol flashes and
the handset beeps or when
the handset screen displays
NEEDS RECHARGING.