On the Edge Marketing Soccer Table #900355 User Manual

Page 5

1. Find a clean, level place to begin the assembly of your soccer table. We

recommend building the table on the box top to protect the parts during assembly.

2. Place one side apron

P1 UPSIDE DOWN with the finished side facing out as shown

FIGURE 1. The ball entry hole will be closest to the floor.

3. Align the rods as shown in

FIGURE 1. Please note the location of the hole that is

near one end of each rod. This is the handle end of the rod. There will be four

handles on each side of the table. It is critical that you set the rods as shown below

so the table will be correct when flipped over.

4.Once you are sure you have the rods set up correctly,slide the other side apron

onto the rods as shown.

P1 - Side Apron

Hole/Handle End

R2 - 3Player Rod Blue

R5 - 3Player Rod Red

R4 - 2Player Rod Red

R2 - 3Player Rod Blue

R1 - 2Player Rod Blue

R3 - 5Player Rod Blue

R6 - 5Player Rod Red

P1 - Side Apron

NOTE:

Dark players are red light

players a blue.