MagTek Audio Reader for Android Devices - Manual (Page 24)

18
Parameters
Return Value
String representing response data
getResponseType
Retrieves response type
-
public String getResponseType()
Parameters
Return Value
String representing response type. For Audio Reader, always “C101”.
getTagValue
Retrieves the value of the specified tag
-
public String getTagValue(String lpstrTag, String lpstrResponse)
Parameters
lpstrTag
tag to search for
lpstrResponse
data to search for that the tag contains
Return Value
String representing tag value
getTLVVersion
Retrieves TLV version
-
public String getTLVVersion()
Parameters
Return Value
String representing TLV version as a two-byte hex string.
getTrackDecodeStatus
Retrieves track decode status. This is a one-byte value, which indicates the status of decoding
track 1. Bit position zero indicates if there was an error decoding track 1 if the bit is set to one.
If it is zero, then no error occurred. If a track has data on it that is not noise, and it is not
decodable, then a decode error is indicated. If a decode error is indicated, the corresponding