MagTek MTMICRImage - Manual (Page 9)

Properties
5
PORTOPEN PROPERTY
Opens or closes the connection to the MICRImage.
Syntax
MICRImage.PortOpen [ = value]
The PortOpen property syntax has these parts:
Part Description
Value A Boolean value specifying the
status.
Example
MICRImage.PortOpen = True ‘Will open the device
MICRImage.PortOpen = False ‘Will close the device
Data Type
Read/Write
Boolean
SETTINGS PROPERTY
Sets or gets the baud rate, parity, data bit, and stop bit parameters.
Syntax
MICRImage.Settings [ = value]
The Settings property syntax has these parts:
Part Description
Value A string expression representing
the communications port settings,
as described below.
Remarks
If value is not valid when the port is opened, the MICRImage control generates error 380
(Invalid property value).
Value is composed of four settings separated by commas:
BaudRate,Parity,DataBits,StopBits
The default value is: ’115200,N,8,1’
Data Type
Read/Write
String