MagTek MAG-WEDGE READER - Manual (Page 12)

Mag-Wedge Reader
6
ERROR DETECTED:
If the Reader cannot decode the data on the magnetic stripe, the LED on the Reader will glow
red. If only one track of data can be decoded, that track will be transmitted and displayed. The
red LED will be lit for the other track. In all cases except at power up, the red LED will only
remain lit for two seconds.
If the Reader does not respond as described above, make a note of the prompts or error messages
on the display and the status of the LED on the Reader. Then call MagTek customer assistance
at (651) 415-6800.
PC CABLE STORAGE
If the PC keyboard cable that was supplied with your computer is not used, store it in an
accessible place. If use of the Reader is discontinued, the cable will be needed to reconnect the
original keyboard cable.