MagTek IntelliStripe 310™ - Manual (Page 27)

Section 2. Installation
17
nnector) to the host (9- Figure 2-11 shows the cable that connects the IntelliStripe 310 (7-Pin Co
pin Connector), P/N 16051408. The standard length of the cable is 6'.
Locking
Tabs
Figure 2-11. Connector Locations, P/N 16051408
Table 2-1 lists the Connector Pin Numbers and Signal Names.
Table 2-1. Pin List for IntelliStripe 310 Connectors, P/N 16051408
Molex 7 Pin (51065-0700) DB-9 Female 2.5mm Power Jack
Pin Number Signal Name Pin Number Signal Name
1 TXD 2 RXD
2 +12V CENTER PIN +12V
3 PWR GND SHELL GND
4 RXD 3 TXD
5 RTS 8 CTS
6 CTS 7 RTS
7 SIGNAL GND 5 GND
6 DSR
4 DTR