MagTek IntelliCAT99875667 - Manual (Page 3)

|
ICAT Utility on Win 7 32/64bit Operator transfer
ICAT Utility Examples transferring Operators from a 1.XX DB to 2.XX DB

Go to the ‘Transfer Users to New Database’ tab

Browse to the 1.8 Source (old Access database)

Browse to destination or new database (UDL file)

Click on Upgrade button once all buttons are Green
Noted below is a screenshot of a Local Install (No old Operator folder in use):
1.8 Source Name
1.X_MtAdmin.MDB
Source Path
\\share\branch1_backup\
1.X_MtAdmin.MDB
Destination File & Path
C:\Program Files\MagTek\IntelliCAT\IntelliCAT.UDL
Or
C:\Program Files
(x86)\MagTek\IntelliCAT\IntelliCAT64.UDL