MagTek EC2000 99875692 - Manual (Page 8)

3 - Tipper Heater Replacement Procedure
ExpressCard 2000| Instant Issuance Card Personalization System | Tipper Heater Replacement Procedure
Page 8
Figure 3-1 - Tipper Heater Cable (TOP VIEW FROM FRONT)
5) Cut the plastic cable tie that holds the tipper heater cable connectors to the left side of the tipper
module. If the cable does not have connectors like those shown in Figure 3-2, you may be working
on an older device; contact MagTek for alternate instructions.
Figure 3-2 - Tipper Heater Cable Tie (TOP LEFT VIEW)
6) Unplug the tipper heater cable.