AMICA PI6513TBD EN - Manual (Page 20)

20
OPERATION
Timer
Timer function makes cooking easier by making it possible to set Duration. It can also be
used as a Kitchen Timer.
Set the Timer
Timer function allows the cooking zone to be switched off after the set time has elapsed.
The timer function can only be set when a cooking zone is operating (heat setting is great-
er than "0"). Timer can be activated at any time for all cooking zones. Timer countdown can
be set from 1 to 99 minutes.
To set the timer:
● select a cooking zone by touching cooking zone selection sensor field (2) and select
the desired heat setting from 1 to 9 using the slider (1) sensor field. The selected heat
setting from 1 to 9 will flash on the display.
● then, during the next 10 seconds, touch the Timer selection sensor field (8). The
number "10" with a flashing zero will be shown on the display.
● Set the Duration by touching the slider sensor (1). Set the units digit first. Next touch
Timer sensor (8) to set the tens digit.
Timer countdown will begin immediately after several seconds.
Once the set Duration has elapsed the appliance will turn off automatically and a single
beep will be heard. The display will show "- -".
The decimal point appearing by the numbers means the timer is active.
Changing Timer setting
Programmed Timer setting can be changed at any time.
● Touch cooking zone selection sensor field (2) to select the desired cooking zone. The
heating setting will flash for 10 seconds.
● Touch the timer sensor field (8) to activate the timer. Timer digits will flash
● Use slider (1) sensor field to adjust the timer Duration.
Check Timer Duration
The remaining cook time duration will be shown on the Timer display. When Timer Duration
is programmed for more than one cooking zone, the shortest remaining duration is shown.