AMICA PI6513TBD EN - Manual (Page 17)

17
OPERATION
Bridge function
● The Bridge function allows pairing of two cooking zones into a single combined cooking
zone. The Bridge function is very convenient, especially when cooking in large pots such
as a baking pan.
The Bridge function allows pairing of two cooking zones into a single combined cook-
ing zone (see figure).
● Touch the sensor (2) to bridge two cooking zones into a single combined cooking zone.
Touch slider sensor (1) to set the heat setting for both cooking zones at the same time.
● If you change the location of the pot from one cooking zone to another, the appliance will
detect a change in the position of the pot and the same heat setting will be set for the new
cooking zone.
● Touch the (2), or sensor to disable the bridge function.
Booster function increases the power of a cooking zone.
● When a cooking zone is active (2), activate the booster function by touching the sen-
sor field (7). Activation of the booster function will be indicated by the symbol shown
on the relevant cooking zone display (2).
● To turn off the Booster function, touch the cooking zone selection sensor field (2) and then
touch the sensor (7) or reduce the heat setting.
Booster function