AMICA PI6514TFD EN - Manual (Page 21)

21
OPERATION
Stop the Timer
To stop the timer countdown before the set Duration has elapsed:
● Touch the cooking zone selection sensor (2) to select the a timer-controlled cooking
zone. The cooking zone heat setting will flash.
● Touch the timer sensor field (8) to activate the timer. Timer digits will flash.
● Touch the slider sensor field (1) to reduce Duration to 00. Timer function will be deacti-
vated while the cooking zone continues to operate until it is switched off manually.
Kitchen Timer
When no cooking zones are in use, the Timer function can be used as a regular Kitchen
Timer.
Set Kitchen Timer
When the appliance is off:
● Touch the timer sensor (8). The number "10" with a flashing zero will be shown on the
display.
● Set the Duration by touching the slider sensor (1). Set the units digit first. Next touch
Timer sensor (8) to set the tens digit.
Once the countdown is complete, an acoustic signal will be heard for 30 seconds. The
display will show "- -".
Stop the Kitchen Timer
When the set Duration has elapsed an acoustic signal is sounded, which can be muted by
touching any sensor field. If no sensor field is touched, the acoustic signal will stop auto-
matically after 30 seconds.
To stop the kitchen timer countdown before the set time has elapsed:
● Touch timer sensor field (8) to activate the timer. Kitchen timer digits will flash.
● Touch the slider sensor field (1) to reduce Duration to 00. Kitchen timer will stop.