4 identification, 1 product description and type designation, 2 product markings – Videotec GEKO IRH User Manual

Page 6: 5 declaration of conformity to product standards, 6 preparing the product for use, 1 unpacking and contents, 1 unpacking, 2 contents, 2 preparatory work before installation, 1 unpacking 6.1.2 contents

EN - English - I

nstruc

tions manual

4 Identification

4.1 Product description and type

designation

State of the art illuminator, which provides

high reliability and excellent image quality. The

GEKO lights the entire scene evenly, eliminating

hotspots and underexposures, for unbeatable

night-time images and secure surveillance of the

area. The high efficiency heat sink body ensures

maximum LED durability and protection against

over-temperatures, whereas the front glass, made

of special technopolymer, provides high infrared

transmittance. The GEKO illuminators are protected

against electrostatic discharges.
These illuminators incorporate a circuit that allows

them to be powered directly from a 12-24Vdc or

24Vac supply.
A weatherproof box with 230Vac or 120Vac power

supply is available as accessory for one or two GEKO

illuminators.
GEKO is supplied with a wall-mount bracket that

rotates horizontally and vertically and can be

assembled in a housing by means of the OSUPPIR

bracket.

4.2 Product markings

See the label attached to the outside of the package.

5 Declaration of conformity
to product standards

• Electrical safety: EN60598
• Safety of laser products: EN60825-1
• Electromagnetic compatibility: EN55022, Class B
• Immunity: EN50130-4
• FCC Part 15, Class B

6 Preparing the product for
use

Any change that is not expressly approved

by the manufacturer will invalidate the

guarantee.

6.1 Unpacking and contents

6.1.1 Unpacking

When the product is delivered, make sure that the

package is intact and that there are no signs that it

has been dropped or scratched.
If there are obvious signs of damage, contact the

supplier immediately.
Keep the packaging in case you need to send the

product for repairs.

6.1.2 Contents

Check the contents to make sure they correspond

with the list of materials as below:
• Illuminator with bracket
• Wall-fastening bracket
• Instructions manual

6.2 Preparatory work before

installation

Fasten the top bracket (01) to the lamp using the

screws and washers (02) supplied.

Fig. 1