Videotec DBH18 - MEDUSA User Manual
Page 10
EN - English - I
nstruc
tions manual
8
Bringing the adapter close to the ring, connect
the crimped cables to the speed dome.
Insert the adapter in its seating, turning it to couple
it with the screws M3x12mm. Tighten the screws.
Fig. 14
Fig. 12
Fasten on fixed plate.
Fig. 13
Fasten on moving plate.
h
The arrow at the bottom of the adapter
indicates the outside of the housing.
See also other documents in the category Videotec Video:
- MAXIMUS MHX (46 pages)
- MAXIMUS MPX (454 pages)
- MAXIMUS WASEX (64 pages)
- EXH (114 pages)
- EXPT (114 pages)
- EXDTRX (124 pages)
- NXPTZ (76 pages)
- NTC (68 pages)
- NXM36 (44 pages)
- NXM (36 pages)
- NTM (36 pages)
- NXL (16 pages)
- NTL (20 pages)
- NXW (44 pages)
- NTW (44 pages)
- NXPTH (42 pages)
- ONXNAB (2 pages)
- NXFIGRU (2 pages)
- VIPNX (24 pages)
- WAS (36 pages)
- DBH18 Brackets (28 pages)
- DSBH120 (4 pages)
- PTH300 (60 pages)
- PTH355P (50 pages)
- PTH900 (60 pages)
- CBZ (52 pages)
- DTRX3 (108 pages)
- DTCOAX (4 pages)
- DTMRX2 (96 pages)
- DTRXDC (68 pages)
- DTWRX (20 pages)
- DCRE485 (44 pages)
- GEKO IRH (44 pages)
- GEKO IRN (52 pages)
- IRHPS (20 pages)
- TWM2 (52 pages)
- TWRC1 (20 pages)