Microlab M 1113 User Manual

Page 3

15. Attachments - Do not use attachments not recommended by the product manufactures, as they
may cause hazards.
16. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket or table. The
product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only
with a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. Any
mounting of the product should follow the manufacturer's instructions and should use a mounting
accessory recommended by the manufacturer.
17. Moving the product - A product and cart combination should be moved with care. Quick stops,
excessive force and uneven surfaces may cause the product and cart combination to overturn.
18. Unused periods - The power cord of the appliance should be unplugged from the outlet during
lightning storms or when the apparatus is left unused for a long period of time.
19. Servicing - Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. Please remove the power plug form the main power source or wall power source when not in use.
When plugged in to a power source, the system is in standby mode, so the power is not entirely cut off.
21. Replacement parts - When replacement parts are required, ensure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
22. Mains fuses - For continued protection against fire hazard, use fuses only of the correct type and
rating. The correct fuse specification for each voltage range is marked on the product.
23. Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If
you do, the speaker may be damaged when a peak level section is suddenly played.
24. The only means of completely disconnecting the product from the power supply is by removing the
power cord from the wall outlet or the product. The wall outlet or the power cord entry to the product must
remain freely accessible at all times while the product is in use.
25. Try to install the product near a wall socket or extension cord and shall be easily accessible.
26. The highest environmental temperature suitable for this product is 40°C.

Introduction

High quality 5.1 surround speaker system for movies, multimedia and personal computer uses. Designed
for 5 point positioning in a room thus creating dynamic sound effects. Using 5 satellites and an amplified
subwoofer for full range sound performances. Bass reflex technology within the subwoofer enhances
deeper bass than regular speakers.
Ideal for home theater setup and connects to any 5.1 channel media player or computer with 3.5mm
stereo jack. Includes a wired remote control for easy volume control and standby mode activation.

Features

1. Beautiful 5.1 surround speakers with dynamic sounds for movie effects
2. Enjoy clear sound and true audio effects
3. Ideal companion for your 5.1 channel CD/DVD, media player or personal computer and notebook
4. Deeper bass and excellent mid to high range audio production
5. Wired remote control with unique rotary volume knob

Packing list

You should find following items while unpacking:

Illustrations

Product connection and operation

Connections

1. Connect all satellites speakers RCA plugs into the subwoofer corresponding audio output jacks.
2. Connect the 3 sets of 2RCA cables to the media player’s 5.1 channel audio outputs or PC’s 5.1 channel
sound card. Some DVD players also features 5.1 channel RCA jacks which you can connect directly to.
3. Next, connect the other end of the cables to the corresponding audio input jacks of the subwoofer back
panel.
4. For alternative listening, you can connect any stereo media player into the FL and FR audio input jacks
for stereo effect.
5. Turn on the AC power supply.

Operation

1. Turn the power on by depressing the power switch at the back of the subwoofer. Next push the standby
switch to active on the wired remote control. The power LED on the wired remote control will illuminate.
2. Ensure the volume level is set to lowest first on the wired remote control.
3. Start the playback device and song.
4. Slowly adjust the volume to your preferred volume level and enjoy.
5. For effects, adjust the bass volume at the side of the subwoofer to your preferred level.
6. When not in use, switch the level on the wired remote control to standby.
7. To turn off the system, please use the power switch at the back of the subwoofer. For prolong un-use
period, please use this to turn off the system safely.
Note: it is advisable not to turn the volume too loud or to its extreme volume limit to avoid damage to the
speaker driver material. Always adjust in slow increment.

M-1113 subwoofer

1 pc

M-1113 satellites

5 pcs

2RCA - 2RCA audio cable

3 pcs

Back view
Audio input
1. Front stereo
2. Center / Subwoofer
3. Surround Left / Right
Audio output
4. Center
5. Front stereo
6. Surround Left / Right
7. Power switch
8. Fuse
9. Power supply cord
10. Bass volume knob

Remote control
1. Power LED
2. Standby switch
3. Volume knob

Wired remote control

1 pc

User manual

1 pc

PC or Notebook

Mp3 / Mp4

Media player

CD / VCD / DVD

player

T400mAL250V

S.W.

CEN

AUDIO INPUT

AUDIO OUTPUT

BASS

OFF

FUSE

AC IN

CENTER

To AC power supply

AC 220 V - 240 V, 50 Hz 260 mA

Wired remote control

Subwoofer

VOLUME

INPUT SEL

M U L T I M E D I A S P E A K E R S Y S T E M

VOLUME

INPUT SEL

M U L T I M E D I A S P E A K E R S Y S T E M

T400mAL250V

S.W.

CEN

AUDIO INPUT

AUDIO OUTPUT

BASS

OFF

FUSE

AC IN

Back view

1
2
3

4
5
6

Remote control

1
2