Burr King BK100 - Manual (Page 6)

CHANGING FILTER BAGS
4.0 Remove plenum or plenum panels above dust bags.
4.1
Release clamps holding dust bags, than remove bags.
INSTALLING NEW DUST BAGS
5.0 Replace foam seal around bag openings before putting in new bags. (See page 7
for dust bag installation.}
5.1
Replace dust bags and reinstall clamps. Be sure bags are sealed together and
around edges of bag modules.
5.2
Reinstall plenum or plenum panels.
BLOWER
6.0 There are two (2) types of blowers used to operate I.C.M.'s line of dust collectors.
The direct drive and the belt drive.
6.1
The direct drive blowers are furnished with three (3) phase totally enclosed tan
cooled motors at 3450 R.P.M. and carry their manufacturers' warranty. The blades
are straight radial blades of heavy cast aluminum for a self cleaning feature,
dynamically balanced. The housing is steel welded 12 and 14 gauge for rigidity and
long life.