Burr King BK100 User Manual
Page 2
See our catalog at
www.burrking.com
Contact
us
at
DOC BK100OP-99 04/01
BURR KING MFG. CO., INC.
1220 TAMARA LANE
WARSAW MO 65355
WWW.BURRKING.COM
(660) 438-8998 (800) 621-2748
FAX (660) 438-8991
Safe operation and good practice use of your BK-100 dust collection
system
April 2001
The BK-100 dust collection system is designed to accept up to two dust inlets. Dust is drawn into the BK-
100 by its onboard air suction system. The air stream and dust is passed through a filter bank where a
significant amount of the dust is removed from the air stream. The air is then ducted out of the BK-100.
The following minimum safe practices should be read, understood, and practiced by all users of the BK-
100, and those persons who maintain the BK-100, or are present in the BK-100 work area.
To minimize fire, explosion, health and other risks to personnel and property:
Do not use your BK-100 to collect materials prone to explosion unless it has been
specifically modified to be “explosion proof”.
Do not draw debris from different alloys into the BK-100 system.
Do not use water or other electrically conductive fluid in your BK-100 unless it has been
specifically modified for wet operation.
Do not mix wood, plastic, paper, or other flammable material debris with metal or other
high temperature dust/debris.
Do use a spark-arresting device if your BK-100 will be used to collect debris from materials
that spark or otherwise create ignition level debris when worked.
Do consult with the appropriate authorities to be certain that your BK-100 installation and
its intended use comply with local, state, and federal codes.
Do use approved inhalation protective devices in conjunction with the BK-100.
Do use approved protective eye, face, hand, and body protection when grinding, polishing,
or otherwise creating dust and debris that you intend the BK-100 collect.
Do disconnect all power to the BK-100 (and any equipment connected to it) prior to
performing adjustments, maintenance, or other activity that involves opening any cover on
the BK-100.
Do read, understand, and abide by the operating and maintenance instructions provided for
the BK-100.
Do use specified replacement parts and filters.
Do maintain the BK-100 in specification compliant condition.
Do call Burr King Manufacturing at 1-800-621-2748 if you need assistance.