Burr King Model 960-401 - Manual (Page 14)

See our catalog at www.burrking.com Contact us @ [email protected]
DOC 960401OP-99 08/02 REV A
4
Remember for operator safety and the continued effectiveness of your model 960-401:
Do not defeat the safety guards and other safety provisions of the model 960-401.
Do not operate the model 960-401 with the safety guard open or the contact wheel guard/platen
assembly (or internal grinding attachment) removed.
Do not reach inside the safety guards while the machine is running. To do so is hazardous.
Do not uses fluids in your grinding process unless your model 960-401 is designed for liquid operation
(NEMA 4, 4X). To do so may create an electrical safety hazard.
Do not uses your model 960-401 to grind/polish explosive materials such unless it is equipped with
explosion proof electrical devices and motor.
Do not mix alloys in your grinding. To do so may create an explosion hazard.
Do not use stone or vitreous wheels on the model 960-401. To do so will create an operator safety
hazard.
Do uses eye, hand, face, arm, leg, feet and body protection that is adequate to protect against flying
debris, forcibly ejected work pieces, broken abrasive belts, etc.
Do train operators and others in safe operating practices.
Post these or equivalent instructions such they are available for ready operator reference.
Burr King Manufacturing can help you with problem solutions, and/or answers to your questions. Please call your Burr
King distributor first. If you can not reach satisfactory conclusion please call the Burr King factory, telephone 1-660-
438-8998.