Burr King Model 720 User Manual
Page 10
See our catalog at
www.burrking.com
Contact
us
at
DOC720OP-99 REV10/02
4
Remember for operator safety and the continued effectiveness of your model 720:
Do not defeat the safety guards and other safety provisions of the model 720.
Do not operate the model 720 with the safety guard open or the contact wheel guard/platen assembly (or internal
grinding attachment) removed.
Do not reach inside the safety guards while the machine is running. To do so is hazardous.
Do not use fluids in your grinding process unless your model 720 is designed for liquid operation (NEMA 4, 4X).
To do so may create an electrical safety hazard.
Do not use your model 720 to grind/polish explosive materials such unless it is equipped with explosion proof
electrical devices and motor.
Do not mix alloys in your grinding. To do so may create an explosion hazard.
Do not use stone or vitreous wheels on the model 720. To do so will create an operator safety hazard.
Do use eye, hand, face, arm, leg, feet and body protection that is adequate to protect against flying debris,
forcibly ejected work pieces, broken abrasive belts, etc.
Do train operators and others in safe operating practices.
Post these or equivalent instructions such they are available for ready operator reference.
Burr King Manufacturing can help you with problem solutions, and/or answers to your questions. Please call your Burr
King distributor first. If you can not reach satisfactory conclusion please call the Burr King factory, telephone 1-660-
438-8998.