Burr King Model 960-400 - Manual (Page 11)

See our catalog at www.burrking.com Contact us at [email protected]
DOC960OP-99 REV 04/02
3
Do not operate the model 960-250 or 960-400 with the safety guard open or the contact wheel
guard/platen assembly (or internal grinding attachment) removed.
Do not reach inside the safety guards while the machine is running. To do so is hazardous.
Do not use fluids in your grinding process unless your model 960-250 or 960-400 is designed for liquid
operation (NEMA 4, 4X). To do so may create an electrical safety hazard.
Do not use your model 960-250 or 960-400 to grind/polish explosive materials such unless it is
equipped with explosion proof electrical devices and motor.
Do not mix alloys in your grinding. To do so may create an explosion hazard.
Do not use stone or vitreous wheels on the model 960-250 or 960-400. To do so will create an operator
safety hazard.
Do use eye, hand, face, arm, leg, feet and body protection that is adequate to protect against flying
debris, forcibly ejected work pieces, broken abrasive belts, etc.
Do train operators and others in safe operating practices.
Post these or equivalent instructions such they are available for ready operator reference.
Burr King Manufacturing can help you with problem solutions, and/or answers to your questions. Please call your Burr
King distributor first. If you can not reach satisfactory conclusion please call the Burr King factory, telephone 1-660-
438-8998.