Airlink101 APSUSB211 User Manual

Page 2

Step 1

Connect one end of the Ethernet cable to the RJ-45 port of the Print Server and attach the other

end of the cable to a router.

Step 2

Make sure the printer is powered OFF, then connect one end of the USB cable to the USB port of

the Print Server and attach the other end of the cable to the USB port of the printer.

Step 3

Power ON the printer.

Step 4

Plug one end of the power cord into the Print Server and the other end into an electrical outlet.

Connecting the Print Server

Section 1

Note:

Before proceeding with the steps below, please verify that the printer operates properly on each of

the computer that will be printing through the Print Server.

Warning:

Only a USB printer may be connected to the USB port of the Print Server. Connecting any

other USB device to the Print Server may damage the Print Server. Do not plug the power cord to the
Print Server until you have reached

Step 4

of this section.