Teledex Opal Series - Manual (Page 24)

24 www.teledex.com OPAL SERIES USER GUIDE
Programming
PROGRAM SPEED DIALS USING
SUBMERGED [STORE] AND [FLASH]
[Store] and [Flash] programming keys are located
under the faceplate and overlay; begin by lifting
up faceplate and overlay, by either a paperclip or
sharp pointer.
STORING A NUMBER INTO MEMORY
KEYS—[STORE]
Each speed-dial location can store up to 24 digits
in tone mode.
Note: Flash programmed into memory counts as
one digit when storing a number.
1. Lift the handset.
2. Press the STORE key.
3. Enter the number to be stored using the
numeric dial pad.
4. Press the desired memory location where
the number is to be stored.
5. If additional numbers are to be stored,
repeat steps 3 through 5.
6. Hang up the handset.
PROGRAMMING FLASH TIMING
Flash timing options are 100 ms through 1000
ms, programmable in 100 ms increments. The
default Flash timing is 600 ms.
1. Lift the handset (off-hook position).
2. Press the STORE key once.
3. Program FLASH by pressing 1 for 100 ms,
2 for 200 ms, etc.
4. Press STORE.
5. Press FLASH.
6. Hang up the handset to exit programming.
PROGRAMMING PAUSE TIMING
Pause timing options are 1 second through 5
seconds, programmable in 1 second increments.
The default pause timing is 3.5 seconds.
1. Lift the handset (off-hook position).
2. Press the STORE key once.
3. Program Pause by pressing 1 for 1 second,
2 for 2 seconds, etc.
4. Press STORE.
5. Press PAUSE/REDIAL.
6. Hang up the handset to exit programming.
FLASH HOOK FUNCTION—[FLASH]
The Flash function is used to access PBX features
or Telco line features such as Call Waiting. The
Flash function is a 600 ms timed line break. If the
Flash function will be used often, store the feature
into memory located for easy access as follows:
1. Lift the handset then press the STORE key.
2. Press the FLASH key.
3. Press the memory location wherein the
FLASH is to be stored.
4. Hang up the handset.
MESSAGE WAITING AND RETRIEVAL
Pressing the touch bar automatically turns on
the speakerphone, and then dials into a user-
programmed voicemail system to retrieve
messages.
1. Lift the handset.
2. Press the STORE key.
OPAL SERIES 2-LINE CORDLESS AND REDIDOCK PHONES