AT&T DECT EL51359 - Manual (Page 23)

Telephone operation
18
Options while on calls
Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the
directory, caller ID history or redial while you are on a call.
Chain dialing can be useful if you wish to access other numbers (such as bank
account numbers or access codes) from the directory, caller ID history or redial
list.
To get to the directory while on a call:
1. Press MENU/
SELECT
.
2. Press TCID or DIRS to scroll to >DIRECTORY, then press
MENU
/SELECT.
3. Press TCID or DIRS to scroll to the desired number.
4. Press
MENU
/SELECT to dial the number shown.
To get to the caller ID history (call log) while on a call:
1. Press MENU/
SELECT
.
2. Press TCID or DIRS to scroll to >CALL LOG, then press
MENU
/SELECT.
3. Press TCID or DIRS to scroll to the desired number.
4. Press
MENU
/SELECT to dial the number shown.
To get to the last number redial while on a call:
Press
PAUSE
/REDIAL to show and dial the most recently dialed number. If you
press
PAUSE
/REDIAL again within two seconds, the number is not dialed.
NOTES:
1. You cannot edit a directory entry while on a call. For more details about the
directory, see page 23.
2. You cannot copy a caller ID entry into the directory while on a call. For more
details about the caller ID history, see page 31.
3. If you press REDIAL/
PAUSE
while on a call, you can only view the most recent
call, and you cannot erase the entry. For more details about the redial memory,
see page 16.
4. Press and hold OFF/
CLEAR
to exit redial, directory or caller ID history when you
are on a call.