AT&T DECT EL51359 - Manual (Page 20)

Telephone operation
15
Making, answering, and ending calls
Making a call
To make a call, press PHONE/
FLASH
or SPEAKER, then enter the telephone
number.
The screen displays the elapsed time as you talk (in hours,
minutes and seconds).
On-hook dialing (predialing)
Enter the telephone number, then press PHONE/
FLASH
or SPEAKER to dial.
Press
MUTE
/DELETE or
OFF
/CLEAR at any time to make corrections as you are
entering number.
Answering a call
To answer a call
• Press PHONE/
FLASH
or SPEAKER.
-OR-
• Press any dial pad key (0-9, * or #).
Temporary ringer silencing
Press OFF/
CLEAR
or
DELETE
/MUTE while the telephone is ringing to silence the
ringer temporarily on that handset only. This turn off the ringer without
disconnecting the call. The next incoming call rings normally at the preset
volume.
Ending a call
To end a call, press OFF/
CLEAR
or return the handset to the telephone base or
charger.
NOTE: Pressing
PHONE
/FLASH to access services from
your local telephone service provider does not affect the
elapsed time.
NOTE: Each handset rings when there is an incoming call unless the ringer volume is
turned off on that handset.
Elapsed time
QIPOF!!!1;11;41