Asus A7N8X-XE - Manual (Page 61)

ASUS A7N8X-XE Motherboard 2-29
Wait for ʻF1ʼ If Error [Enabled]
When set to Enabled, the system waits for the F1 key to be pressed when error
occurs. configuration options: [Disabled] [Enabled]
Hit ʻDELʼ Message Display [Enabled]
When set to Enabled, the system displays the message “Press DEL to run Setup”
during POST. Configuration options: [Disabled] [Enabled]
2.6.3 Security
This menu allows you to adjust the system security settings.
Security Settings to change
password.
again to
disable password.
Supervisor Password :Not Installed
User Password :Not Installed
Change Supervisor Password
Select this item to set or change the supervisor password. The Supervisor
Password item on top of the screen shows the default Not Installed. After you set a
password, this item shows Installed.
To set a password:
1. Select the Change Supervisor Password item and press .
2. From the password box, type a password composed of at least six letters
and/or numbers, then press .
3. Confirm the password when prompted.
The message “Password Installed” appears after you successfully set your
password.
To change the supervisor password, follow the same steps as in setting a user
password.
To clear the supervisor passowrd, select the Change Supervisor Password then
press . The message “Password Uninistalled” appears.
Change Supervisor Password
Change User Password
←→ Select Screen
↑↓ Select Item
Enter change
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY