Kenwood KVT-729DVD - Manual (Page 4)

4 | KVT-729DVD
Connection
PRK SW
BATT
ACC
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Monitor/Player unit
USB connector
USB device
(commercially available)
FUSE ( 10A )
FUSE ( 5A )
Ground wire (Black)
Connector A
Connector B
Ground wire (Black)
Do not connect.
The cable (Accessory 3) is
fixed with a chassis using
harness band (Accessory
!).
Accessory !
Wiring harness
(Accessory
2)
To connect the Kenwood navigation system,
consult your navigation manual.
Accessory 0
(ISO–JASO)
Antenna Cord (ISO)
For the sake of safety, be sure to connect the parking sensor.
Connect to the vehicle's parking brake
detection switch harness
using the supplied relay connector.
Battery wire (Yellow)
Ignition wire (Red)
Steering remote control input (Light Blue/Yellow)
To steering remote
If no connections are made, do not let the cable come out from the tab.
Connect to the terminal that is grounded when either
the telephone rings or during conversation.
Mute wire (Brown)
Connect either to the power control terminal when using the optional
power amplifier, or to the antenna control terminal in the vehicle.
Power control/ Motor antenna control wire
(Blue/White)
To "EXT.AMP.CONT." terminal of the amplifier
having the external amp control function.
External amplifier control wire (Pink/Black)
(Orange/White) Dimmer control wire (Orange/White)
To vehicle's reverse lamp harness
Reverse sensor wire (Purple/White)
Accessory 4
Parking sensor wire (Light Green)
B54-4516-00_00.indd 4 B54-4516-00_00.indd 4 07.1.9 7:20:50 PM 07.1.9 7:20:50 PM