Kenwood TK-2140E - Manual (Page 28)

24
S
ELCALL
(S
ELECTIVE
C
ALLING
)
A Selcall is a voice call to a particular station or to a
group of stations.
■ Transmitting
1 Select your desired group and channel.
2 Press the key programmed as Selcall List to
enter Selcall Mode.
3 Use the encoder to select the ID of the station
you want to call.
4 Press the PTT switch and begin your conversation.
■ Receiving
An alert tone will sound, the transceiver will
automatically enter Selcall Mode, and the calling
station’s ID will appear when a Selcall is received.
To respond to the call, press the PTT switch and
speak into the microphone.
■ Identification Codes
An ID code is a combination of a 3-digit Fleet
number and a 4-digit ID number. Each transceiver
must have its own Fleet and ID number.
• Select a Fleet number or “ALL” Fleet and a group ID
number to make a group call.
• Select a Fleet number and an Individual ID number to
make an individual call.
• Select a Fleet number and “ALL” ID to make a fleet call.
• Select “ALL” Fleet and “ALL” ID to make a call to all units
(Broadcast call).
• Select “ALL” Fleet and an ID number to make a call to the
selected ID in all fleets (Supervisor call).
Note: The ID range may be limited by programming.