Kenwood TK-2140E - Manual (Page 24)

20
S
CAN
L
OCKOUT
If a programmable auxiliary key is programmed with
Scan Del/Add, each channel can be locked out of the
scan sequence manually. The add indicator (
▼ ) will no
longer appear on the display when the selected channel
is locked out.
S
CAN
R
EVERT
You can select a revert channel using the Channel keys
(or encoder).
Six types of Scan Reverts which can be programmed by
your dealer are available:
• Last Called: The last channel received is assigned as the
new revert channel.
• Last Used: The last channel responded to is assigned as
the new revert channel.
• Selected: The last channel selected is assigned as the
new revert channel.
• Selected + Talkback: If the channel has been changed
during Scan, the newly selected channel is assigned as
the new revert channel. The transceiver “talks back” on
the current receive channel.
• Priority: If your dealer has programmed a Priority
channel, this channel is the revert channel.
• Priority + Talkback: If your dealer has programmed a
Priority channel, this channel is the revert channel. The
transceiver “talks back” on the current receive channel.