Kenwood TK-2260EX - Manual (Page 10)

2
PREPARATION
INSTALLING/ REMOvING THE BATTERY PACK
1
2
1 Match the guides of the battery
pack with the grooves on the
upper rear of the transceiver,
then firmly press the battery
pack in place.
2 Lock the safety catch to
prevent accidentally releasing
the battery pack.
3
3 To remove the battery pack,
lift the safety catch, press the
release latch, then pull the
battery pack away from the
transceiver.
Note: Before charging a battery pack that is attached to the
transceiver, ensure that the safety catch is firmly closed.
INSTALLING THE (OPTIONAL) ANTENNA
Antenna Screw the antenna into the connector
on the top of the transceiver by
holding the antenna at its base and
turning it clockwise until secure.