Kenwood DNX5240BT - Manual (Page 26)

26 DNX5240BT/DNX5240/DDX5024/DDX5054/DDX54R
Radio Listening
Functions While Displaying the Control
Screen
Switches to the source control screen to use
various functions.
[TUNER] button on the "Source Select" screen
7 7
5
9 10 11 12 8
6
1 2 3
4
13
14
15
16 17 18
1 Band display
2 Preset number
3 Frequency display
Various control screens appear in the Tuner Source mode.
• For the basic method of receiver button operations, see (page 10).
• Set the remote controller mode switch to "AUD" mode before starting operation, see
(page 82).
4 Radio station information display.
Selects the Program Service Name, Title &
Artist name, Station Name, Category Name
1/2, or Radio Text.
5 Switches to the FM1/2/3 band.
6 Switches to the AM band.
7 Tunes in a station.
Use the (page 27) to change
the frequency switching.
8 Switches the button display.
9 Selects the Monaural reception mode. (Only
when receiving the FM broadcast)
p Selects the Auto Memory mode.
(See page 28 for the )
q Switches the Seek mode.
(See page 27 for the )
w Switches the number of lines displayed in
the Information Display.
e Turns the Local Seek function On or Off.
r Turns the Traffic Information function On or
Off.
See , (page 29).
t When to buttons appear, you
can recall the stations on memory.
For memory of broadcasting stations, see
(page 28) or Memory> (page 28).
y Searches station by program type. See
u Lists and selects memorized station.
i Displays Radio Text screen. See
Text> (page 29).
B64-4258-00_00.indb 26 B64-4258-00_00.indb 26 08.10.30 7:27:20 PM 08.10.30 7:27:20 PM